Все о металле и его обработке   Поиск   Свежие темы   Горячие Темы     Участники    На главную страницу  Модерация   Регистрация /  Вход

Индекс форума Профиль для :: Jackson Аватар Обо мне Jackson Звание: Карма: Дата регистрации:  18/05/2023 07:38:21 Всего отправлено сообщений:  Отправленные сообщения недоступны Создано новых тем: Новых тем не было создано Вебсайт:  http://www.callroutersupport.com/tp-link-router-support/ Биография: To set up a TP-Link router and perform a firmware update, you can follow these general steps: Connect your TP-Link router to your modem using an Ethernet cable. Plug one end of the cable into the modem's Ethernet port and the other end into the router's WAN or Internet port. Power on your modem and wait for it to establish a connection with your internet service provider (ISP). Once the connection is established, proceed to power on your TP-Link router. Connect your computer or mobile device to the TP-Link router either via Ethernet cable or through a wireless connection. If using a wireless connection, look for the default Wi-Fi network name (SSID) and password printed on a label on the router. Open a web browser on your connected device and enter the default TP-Link router's IP address into the address bar. The default IP address is usually "192.168.1.1" or "192.168.0.1". Press Enter to access the router's login page. On the login page, enter the default username and password. The default credentials are typically "admin" for both the username and password. If these credentials don't work, consult your router's documentation or check TP-Link's support website for the correct login information. Once logged in, you will be in the router's web interface. Look for the "Quick Setup" or "Setup Wizard" option and follow the on-screen instructions to configure your internet connection. This usually involves selecting the appropriate connection type (e.g., dynamic IP, PPPoE) and entering any required information provided by your ISP. After setting up the internet connection, you can proceed to update the firmware. Go to the "System Tools" or "Maintenance" section of the router's web interface and look for a "Firmware Upgrade" or "Router Upgrade" option. If there is a new firmware version available, download it from the TP-Link support website and save it to your computer. In the router's firmware upgrade section, choose the option to update the firmware manually. Locate the firmware file you downloaded and select it. Follow the on-screen instructions to initiate the firmware update process. Wait for the firmware update to complete. Do not interrupt the process or turn off the router during this time. Once the update is finished, the router will reboot automatically. Please note that the exact steps and menu options may vary depending on the specific model of your TP-Link router. It's always recommended to consult the router's user manual or visit TP-Link's support website for model-specific instructions and firmware downloads. Закладки: Нет закладок для этого пользователя. Контакт Jackson Личное сообщение:

Powered by JForum 2.1.9 © JForum Team